Canon LU A 8S, LU_A 80, LU A 90 instruction manual Usingold, Power adapter

Usingold

Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed.

1. Turn the POWER switch to OFF.

2.Connect the power cord to the

power adapter. (_

3.Plug the power cord into a power outlet.

4.Connect the power adapter to the

camcorder's DC IN terminal.

O Turn off the camcorder before connecting or disconnecting the power adapter. O If the adapter is used close to a TV, it may cause picture interference. Move the

adapter away from the TV or the antenna cable.

O Do not connect any products that are not expressly recommended to the camcorder's DC IN terminal or to the power adapter.

O You may hear some noise from the power adapter during use. This is not a malfunction.

O Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.

O When the power adapter or battery pack is defective, the CHARGE indicator

flashes rapidly (at about 2 flashes/second) and charging stops. O The CHARGE indicator informs you about the charge status.

0-50%: Flashes once every second

More than 50%: Flashes twice every second

100%: Glows steadily

14