Recording from Qther Device

You can record images from devices connected via the AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. For connecting instructions, refer to page 36 and 79.

1.Set the camcorder to PLAY (VCR) mode.

If a cassette is loaded, make sure that the tape is stopped.

When recording via the AV terminal, make sure that "AV,,_ DV" is displayed on the screen. When recording via the DV terminal, make sure that "AV_ DV" is not displayed. Change the setting as necessary ([::::[384).

2, Connected device: Load a recorded cassette and play back the tape.

3, Press the PHOTO button halfway when the scene you wish to record

appears.

The still image, remaining image capacity and other information appear.

When you press the PHOTO button on the wireless controller, recording starts immediately.

4.Press the PHOTO button fully. The card access indicator flashes.

O When recording from a tape in the camcorder or other video devices:

-A still image recorded from an image in widescreen mode will be vertically compressed.

-The data code of the still image will reflect the date and time it has been recorded on the memory card.

-The size of the still image will be 640 x 480. The still image quality can be selected.

O When connecting with a DV cable, make sure that no USB cable is connected to the camcorder.

96

Page 96
Image 96
Canon LU_A 80, LU A 90, LU A 8S instruction manual Recording from Qther Device, Set the camcorder to Play VCR mode