1. Introduction
Bottom
Rear Foot (Left / Right)
Adjustable Tilt Foot (See page 26)
Lamp Cover (See page 57)
Adjustable Tilt Foot Lock Button (See page 26)
HINT: The Canon logo is on the panel of the projector cabinet . When projecting an image with the projector hung from the ceil- ing, turn the Canon logo upside down.
To turn the logo upside down, follow the steps below.
1. Push one end of the logo gently.
The other end will pop up slightly.
• The right drawing shows the part “C” is pressed gently.
• The part “n” on the other end will pop up.
2. Push and hold the end of the logo gently and rotate the logo by holding the other end.
• The right drawing shows that with the part “C” pressed the logo is rotated by holding the part “n” on the other end.
3. Release your hold and turn the logo upside down.
5
