Canon LV-7260 Enabling Fan Speed Mode Fan mode, Selecting Default Source Default source select

5. Using On-Screen Menu

Enabling Fan Speed Mode [Fan mode]

This option allows you to select two modes for fan speed: Auto mode and High speed mode.

Auto	The built-in fans automatically run at a variable speed according to the internal temperature.
High	The built-in fans run at a fixed high speed.

When you wish to cool down the temperature inside the projector quickly, select [High].

NOTE: It is recommended that you select High speed mode if you continue to use the projector for consecutive days.

Selecting Default Source [Default source select]

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last	Sets the projector to default to the previous or last active input each time the projector is turned on.
Auto	Searches for an active source in order of Computer 1 → Computer 2 (Digital) → Computer 2 (Analog)
	→ Video → S-Video → Computer 1 and displays the first found source.
	NOTE: The LV-7260/LV-X7 will search for an active source in order of Computer → Video → S-Video →
	Computer and displays the fi rst found source.

Computer 1 ........... Displays the RGB source from the Computer 1 Input [ANALOG IN-1] connector every time the projector

is started up. (LV-7265 only)

Computer 2 (Digital) ... Displays the DVI digital source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Digital) con- nector every time the projector is started up. (LV-7265 only)

Computer 2 (Analog) .. Displays the RGB source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Analog) connector every time the projector is started up. (LV-7265 only)

Computer	Displays the RGB source from the Computer Input [ANALOG IN] connector every time the projector is
	started up. (LV-7260/LV-X7 only)
Video	Displays the Video source from the VIDEO IN connector every time the projector is started up.
S-Video	Displays the Video source from the S-VIDEO IN connector every time the projector is started up.

Enabling the deinterlace [Deinterlace]

Turns on or off the deinterlace function for a telecine signal.

On	Default standard setting.
Off	Select this option if there is any jitter or artifacts in video.

NOTE: This feature is not available for RGB, 480p, 576p, and HDTV signals.

51