Canon LV-7265 ❷ Selecting a Source, Projecting an Image Basic Operation, Selecting Default Source

3. Projecting an Image (Basic Operation)

❷Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the pro- jector.

Selecting from INPUT List

Press and quickly release the INPUT button on the projector cabinet

WER

POWER INFO.

IMAGE INPUT AUTO PC

INPUT

ASPECT NO SHOW

to display the Source list. Each time the INPUT button is pressed, the input source will change as follows: “Computer 1”, “Computer 2 (Digi- tal/Analog) [LV-7265 only]”, “Video”, "S-Video", To display the selected source, allow 1 second to elapse.

AUTO PC

VOL

-

MENU

BACK

Detecting the Signal Automatically

Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the in- put source will change as follows:

LV-7265

Computer 1 → Computer 2 (Digital) → Computer 2 (Analog) → Video

→S-Video → Computer1 → ...

LV-7260/LV-X7

Computer → Video → S-Video → Computer → ...

TIP: If no input signal is present, the input will be skipped.

TIP: The COMPUTER 2 button on the remote control toggles the Computer 2 source between [Computer 2 (Digital)] and [Computer 2 (Analog)].

Selecting Default Source

You can set a source as the default source so that it will be displayed each time the projector is turned on.

1.Select [Setup] → [Options] → [Default source select] from the menu.

The [Default source select] screen will be dis- played.

2.Select a source as the default source, and press the OK button.

3.Press the BACK button a few times to close the menu.

4.Restart the projector.

The source you selected in step 2 will be pro- jected.

(→ page 51)

25