Canon LV-7265, LV-7260 Maintenance, ❶ Cleaning or Replacing the Filter, To clean the air-filter

6. Maintenance

This section describes the simple maintenance procedures you should follow to clean the filter and replace the lamp.

❶Cleaning or Replacing the Filter

The air-fi lter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the fi lter is dirty or clogged, your projector may overheat.

CAUTION

•Turn off the projector, turn off the main power switch and unplug the projector before replacing the fi lter.

•Only clean the outside of the fi lter cover with a vacuum cleaner.

•Do not attempt to operate the projector without the fi lter cover.

To clean the air-filter:

Vacuum the fi lter through the fi lter cover.

BACK MENU

-
	PC	AUTO
INPUT

WOP

NING WAR

MPLA

To reset the fi lter usage time, from See also page 54 for resetting the

the menu, select [Reset] → [Filter counter]. fi lter usage time.

To replace the filter (sponge):

1.Remove the filter cover by pushing down on the catch of the cover until you feel it detach.

Catch

LV-X7 (one filter)

LV-7265/LV-7260 (two filters)

H

S

U

P

2. Gently peel off the filter (sponge) and replace it with the new one.

55