7.Press the STOP 3 button on the wireless controller to stop dubbing.
MV650i MV630i MV600i Audio device: Stop playback.
ZERO SET
MEMORY REW PLAY FF
12bit | STOP |
|
AUDIO OUT |
| |
AUDIO DUB. PAUSE | SLOW | 2 |
AV INSERT | AV DV | REMOTE SET |
E
Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.
Playing Back the Added Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.
12bit AUDIO 
OUT button 
MENU button |
Selector dial
CAMERA | PLAY (VCR) | CARD CAMERA | CARD CAMERA |
AUDIO SET UP | 12bit AUDIO•STEREO1 |
| |
( | 43) |
1.Open the menu and select [AUDIO SET UP], select a setting and close the menu.
•STEREO 1: Plays back the original sound.
•STEREO 2: Plays back the added sound.
•MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.
•MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2.If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SET UP]. Select [MIX BALANCE], adjust the balance with the selector dial and close the menu.
Turn the selector dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2.
❍The camcorder resets to [STEREO 1] when you turn the camcorder off.
However, the mix balance is memorised by the camcorder.
❍You can also press the 12bit AUDIO OUT button on the wireless controller to select the audio output. However, the mix balance can only be adjusted in the menu.
Editing
97
