Canon MV600i instruction manual MV650i Recording Motion Jpeg Movies on a Memory Card

E

MV650i Recording Motion JPEG Movies on a Memory Card

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder

( 109), or from devices connected via the AV terminal (analog line-in) or the DV terminal ( 109).

❍Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (<<< or >>>) in the upper right corner of the screen or the card access indicator is flashing. Doing so could result in data damage.

❍When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.

❍Do not load/unload a cassette during recording.

❍Make sure to insert a memory card with enough remaining capacity.

❍ The sound of a movie recorded on a memory card will be monaural.

Recording with the Camcorder

CAMERA PLAY (VCR)

CARD CAMERA CARD PLAY (VCR)

1.Set the camcorder to CARD CAMERA mode.

2.Press the start/stop button to begin recording.

You can record up to 10 seconds in 320 × 240 and up to 30 seconds in 160 × 120.

CAMERA

OFF PLAY (VCR)

Using a Memory Card

MV650i MV630i

3.Press the start/stop button to stop recording.

The camcorder starts writing the movie on the memory card.

To use the self-timer, press the (self-timer) button before step 2 ( 69) and press the start/stop button.

108