
MV650i MV630i MV600i
Recording from Digital Video Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality.
❍When recording from digital video devices, make sure that “AV \ DV” is not
displayed on the screen. If “AV \ DV” is displayed, change the setting ( 92).
❍Anomalous signals sent from the connected device may be recorded as anomalous picture (although it may not appear so on the screen), or it may not be recorded at all.
❍Copyright protected signals cannot be recorded.
❍Blank sections may be recorded as anomalous picture.
❍If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.
❍You can connect only one device with the DV cable.
❍ You can use the camcorder for playback and recording without reconnecting the DV cable.
CAMERA | PLAY (VCR) | CARD CAMERA | CARD CAMERA |
E
1.Connect the camcorder to the digital video device.
See Connecting a Digital Video Device ( 87).
2.Set the camcorder to PLAY (VCR) mode and load a blank cassette.
“DV IN” appears.
3.Connected device: Load the recorded cassette.
4.Press the REC PAUSE button on the wireless controller.
AV INSERT AVDV REMOTE SET
REC
PAUSE
WIRELESS CONTROLLER
Editing
In record pause mode and during recording, you can check the picture on the screen.
5.Connected Device: Play back the tape.
6.Press the PAUSE a button on the wireless controller when the scene you wish to record appears.
7.Press the STOP 3 button on the wireless controller to stop recording.
•Press the PAUSE a button on the wireless controller to pause recording.
•Press the PAUSE a button again to restart recording.
8.Connected Device: Stop playback.
ZERO SET | REW | PLAY |
| FF |
MEMORY |
| |||
12bit |
| STOP |
| |
AUDIO OUT |
|
| ||
AUDIO DUB. | PAUSE | SLOW | 2 | |
| AV INSERT | AV | DV | REMOTE SET |
ZERO SET | REW | PLAY |
| FF |
MEMORY |
| |||
12bit |
| STOP |
| |
AUDIO OUT |
|
| ||
AUDIO DUB. | PAUSE | SLOW | 2 | |
| AV INSERT | AV | DV | REMOTE SET |
89