Installing the Backup Battery
The backup battery allows the camcorder to retain date, time and other camcorder
E
settings while the power source is disconnected. Power the camcorder from a household power source or with a battery pack when replacing the backup battery.
1.Open the backup battery cover.
2.Insert the lithium battery with the + side facing outward.
3. Close the cover.
q | w | e |
|
|
| the Basics | Mastering |
WARNING!
•The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100° C or incinerate the battery.
•Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony, Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or explosion.
•The used battery should be returned to the supplier for safe disposal.
❍Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit.
❍Wipe the battery with a clean dry cloth to ensure proper contact.
❍Keep the battery out of reach of children. If it is swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may damage stomach and intestines.
❍Do not disassemble, heat or immerse the battery in water, to avoid the risk of explosion.
The backup battery has a life span of about a year. j flashes to inform you that |
|
it needs to be replaced. | 17 |
