Recording Still Images on a Memory Card 
You can record still images with the camcorder, from a tape in the camcorder
(
104), or from devices connected via the DV terminal or AV terminal (
105).
Card access | PHOTO button | E |
indicator |
|
|
❍Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (<<< or >>>) in the upper right corner of the screen or the card access indicator is flashing. Doing so could result in data damage.
❍When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.
Make sure to insert a memory card with enough remaining capacity.
Recording with the Camcorder
CAMERA | PLAY (VCR) | CARD CAMERA | CARD PLAY (VCR) |
1. Set the camcorder to CARD CAMERA mode.
The remaining image capacity and other information appear.
2. Press the PHOTO button halfway.
• F flashes in white and turns green when focus is adjusted. |
|
• Exposure is locked. |
|
• When you press the PHOTO button on the wireless controller, | PHOTO |
| |
recording starts immediately. |
|
3. Press the PHOTO button fully. |
|
• You hear a shutter sound, and the screen appears as if a |
|
shutter has been released. |
|
• The card access indicator flashes. | PHOTO |
|
• The still image shown on the screen will be recorded on the memory card.
To use the 
69), press the 
Using a | MV650i |
Memory | MV630i |
Card |
|
103
