
E
Loading a Cassette
Use only video cassettes marked with the D logo.
Mastering the Basics
Loading and Unloading
1. Slide and hold the OPEN/EJECT |
|
|
switch and open the cassette | Tape | w |
compartment cover. | protection tab | q |
The cassette compartment opens |
| |
|
| |
automatically. |
|
|
2. Load/unload the cassette. |
|
|
• Load the cassette with the window facing |
|
|
the grip belt and the REC/SAVE tab facing |
| OPEN/EJECT |
upward. |
| |
• Unload the cassette by pulling it straight |
|
|
out. | e |
|
|
| |
3. Press the P mark on the cassette |
|
|
compartment until it clicks. |
|
|
Wait for the cassette compartment to retract |
|
|
automatically. |
|
|
4. Close the cassette compartment |
|
|
cover. | click |
|
|
| r |
❍Do not interfere with the cassette compartment while it is opening or closing automatically or attempt to close the cover until the cassette compartment has fully retracted.
❍Be careful not to get your fingers caught in the cassette compartment cover.
❍If the camcorder is connected to a power source, cassettes can be loaded/unloaded even if the POWER switch is set to OFF.
❍v flashes if no cassette is inserted when turning on the power (in CAMERA and PLAY (VCR) mode).
❍With some types of tapes, the remaining tape display may not be accurate.
20