E
Changing the Remote Sensor Mode
Two remote sensor modes and an off setting are available to prevent interference
from other Canon wireless controllers being used nearby.
Turning the Remote Sensor Off
CAMERA | PLAY (VCR) |
CARD CAMERA | CARD PLAY (VCR) |
(
43)
SYSTEM
WL.REMOTE••• 
1
Open the menu and select [SYSTEM]. Select [WL. REMOTE], set it to [OFF B] and close the menu.
”B” appears.
Changing the Remote Sensor Mode
CAMERA | PLAY (VCR) |
CARD CAMERA | CARD PLAY (VCR) |
the Full Range | of Features |
Using |
|
( | 43) | SYSTEM | WL.REMOTE••• 1 |
|
|
1.On the camcorder, open the menu and select [SYSTEM]. Select [WL. REMOTE], set it to [A 2] and close the menu.
The selected mode appears for 4 seconds.
2.On the wireless controller, press and hold the REMOTE SET button. Set the mode to the same of the camcorder. Press the ZOOM T button for mode 2. Keep the button pressed for over 2 seconds.
If you have set the camcorder to mode 1, press the ZOOM W button for mode 1.
AUDIO DUB. | PAUSE | SLOW | 2 |
| AV INSERT | AV DV | REMOTE SET |
REC |
|
|
|
PAUSE |
|
|
|
WIRELESS CONTROLLER | |||
START | PHOTO | ZOOM | |
/STOP | W | T | |
SELF T. | D.EFFECT. |
| MENU |
TV SCREEN | ON/OFF |
| SET |
❍The wireless controller returns to mode 1 when you replace the batteries.
Change the mode if necessary.
❍ Make sure that camcorder and wireless controller are set to the same mode. Display the camcorder’s mode by pressing any button on the wireless controller (except of the REMOTE SET button) and set the wireless controller’s mode to the same mode. Change the batteries if the wireless controller still does not
48
work.
