Canon MV600i, MV650i instruction manual Connecting the Devices, Output

MV650i MV630i MV600i

Converting Analog Signals into Digital Signals (Analog-Digital Converter)

E

By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output terminal only.

❍Headphones cannot be used during analog-digital conversion.

❍Unload the tape from the camcorder.

❍Turn off all devices before starting the connections.

❍Depending on the signal sent from the connected device, the conversion from analog to digital signals might not work properly (e.g., signals that include copyright protective signals or anomalous signals such as ghost signals, etc.)

❍When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability (commercially available). The SCART Adapter PC-A10 is for output only.

We recommend powering the camcorder from a household power source.

Connecting the Devices

This illustration shows how to connect using a S-video cable. You can also connect the yellow plug of the stereo video cable to the VIDEO terminal. Refer also to the instruction manual of the connected device.

OUTPUT

S Signal flow

	S-150 S-video Cable (optional)	S(S1)-VIDEO
		VIDEO
		L
AV	Signal flow	AUDIO
		R

STV-250N Stereo Video

Cable (supplied)

DV

Signal flow

4 pin – 4 pin: CV-150F DV Cable (optional)

4 pin – 6 pin: CV-250F DV Cable (optional)

Editing

91