Canon PS-NX6000 manual 19Releasing a Dimm

4Motherboard

TO REPLACE A DIMM

1.To release a DIMM, push outward on the levers on each side of the DIMM.

DIMM Lever

Lever

Socket notch DIMM notch

FIGURE 4-19Releasing a DIMM

2.Pull the DIMM straight out of the socket.

3.To replace a DIMM, insert the DIMM straight into the socket and close the levers at each side to lock it into place.

NOTE: The socket is keyed so that the DIMM fits only one way. (See notches in the figure above.)

Make sure that the levers close securely around the ends of the DIMM and that each DIMM is fully seated in its socket.

4.Reassemble the ColorPASS (see page 4-14)and verify its functionality (see page 4-16).

4-35