Canon PS-NX6000 manual 7DIMM and socket

4Checking internal connections

TO CHECK MOTHERBOARD DIMM CONNECTIONS

1.Check that all DIMMs are locked. If any DIMMs are loose, release and reseat them.

The DIMMs on the motherboard are held in place by levers at each end.

2.To release a DIMM, push outward on the levers on each side of the DIMM.

DIMM Lever

Lever

Socket notch DIMM notch

FIGURE 4-7DIMM and socket

3.Pull the DIMM straight out of the socket.

4.To replace a DIMM, insert the DIMM straight into the socket and close the levers at each side to lock it into place.

NOTE: The socket is keyed so that the DIMM fits only one way. (See notches in the figure above.)

Make sure that the levers close securely around the ends of the DIMM and that each DIMM is fully seated in its socket.

4-13