Projecting Data on USB Flash Memory (SX80)
3 Connect a USB flash memory.
Connect a USB flash memory to the USB terminal.
Use a USB cable to connect a digital camera or USB memory card reader.
Be sure to use the USB cable supplied with the equipment connected to the projec- tor.
USB flash memory
USB cable
| Hard disk |
USB cable | USB memory |
| card reader |
If the projector recognizes a USB flash memory, The "USB file browser" appears.
•Only the drive which has been set in advance is displayed.
•If multiple memory devices are attached to a
If connection to the USB flash memory fails, the screen as shown in the right appears.
Disconnect the USB flash memory, and connect it again.
If the projector does not recognize the device, the screen as shown in the right appears.
•If a USB hub is connected, the screen as shown in the right appears.
•You cannot connect a USB hub to this projector.
•When connecting a device which consumes large amount of power such as USB hard disk, use a commercial power supply.
•If the power supplied from the USB terminal is insufficient, malfunction of the USB flash memory may result or the projector unable to recognize the device.
Memory Flash USB an or Camera Digital a from Image an Projecting
113