Preparing the Remote Control

■Installing Remote Control Batteries

1 Open the battery com-

2 Insert batteries.

3 Replace the compart-

partment lid.

Insert new two AAA-size

ment lid.

Slide the lid with it

batteries in the compart-

 

pressed down.

ment with the + and –

 

 

poles positioned correctly.

 

Use Before

•If buttons on the remote control are inoperative when you attempt to operate the projector, replace the batteries with new ones.

•It is recommended to check the batteries before a presentation.

■Remote Control Operating Range

Point the remote control to the infrared remote receiver on the front or rear of the projector whenever pressing any button.

30°

5m (16.4')

30°

5m (16.4')

30°

30°

•Use the remote control within a distance of approximately 5 m (16.4') from the projector.

•Use the remote control within an angle of 30° in any direction from directly in front of the infrared remote receiver.

•The remote control may be inoperative if there is an obstacle between the remote control and main unit or the infrared remote receiver on the main unit is exposed to direct sunlight or strong light of lighting equipment.

•When you use two projectors at the same time, you can change the channel settings to prevent the two remote controls from interfering with each other. (P101)

29