Setting Up the Projector
■When Pointing the Projector UpWhen the screen is placed on a higher position, point the projector up using the adjustable foot.
You can point it up as far as 10 degrees.
The keystone distortion of the projecting image can be corrected with the auto keystone (P50) or by using the keystone distortion adjust function (P58).
1 Lift the front side of the projector and push the adjusting foot lock button to extend the adjustable foot.
2 Raise the image to the desired height angle, then release the button to lock the foot in place.
If Keystone Distortion is Too Large
If the keystone distortion is too large to adjust, adjust the projector height by, for example, placing it on a pedestal.
Image an Projecting
Keystone Distortion | Pedestal |
|
35