Safety Instructions

Position the projector in a horizontal position. Incorrect installation may cause

troubles and accidents.

 

 

 

Caution • Do not tilt the projector more than 20

 

 

 

degrees above and below the horizontal.

 

 

 

 

 

 

• When you want to use your projector point-

20°

 

ing up or down, make sure to place the pro-

 

 

 

20°

 

jector straight up or down.

 

 

 

Do Not Use in the Following Environments

Do not place the projector on an unstable or slanted surface. The projector may fall causing a personal injury.

Do not place it in an oily, smoky, or damp location (e.g., near a cooking table or a humidifier). It may cause a fire or an electric shock.

Place the projector with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Otherwise, it may damage the projector due to bad exhaust ventilation.

Do not put anything near the exhaust vent that may deform or deteriorate due to heat.

Do not install the projector in a humid or dusty location or a position where there is a lot of oily or cigarette smoke. Optical parts such as a lens and mir- ror may be stained, resulting in poor picture quality.

Do not place it near an exhaust outlet of air-conditioning equipment. Other- wise, it may be damaged.

If the projector is carried from a cold place to a warm place or the room temperature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture. Wait until condensation evaporates and normal picture is shown.

Do not use the projector in a place subject to either very high or very low tem- peratures. Doing so may cause malfunction. The ranges of the operating and storage temperatures are as shown below:

Operating temperature: +5°C to +35°C (Humidity: 85% or below)

Storage temperature: -10°C to +60°C (Humidity: 90% or below)

Using the Projector at 2300 Meters or More Above Sea Level

If you use the projector at 2300 meters or more above sea level, the special configuration is required to cool down the projector properly. Contact your dealer.

18