Setting an IP Address (SX80)

4 Click [TCP/IP], enter appropriate values in the following field, and click the [OK] button.

[IP address]:

IP address of projector

[Subnet mask]:

Subnet mask of projector

[Default gateway]:

Default gateway of network

5 Click [Mail], enter appropriate values in the following field for the error report, and click

the [OK] button.

 

[To:]:

E-mail address to which error notification message is sent.

 

(Within 63 alphanumeric characters)

[Cc:]:

Second E-mail address to which error notification mes-

 

sage is sent (Within 63 alphanumeric characters, can be

 

omitted).

[From:]:

Sender of E-mail (projector)

[SMTP server IP address]: IP address of available SMTP server

[SNTP server IP address]: IP address of available SNTP server (can be omitted)

[Time zone]:

Time zone of installation site

[Mail resend interval]:

E-mail resend interval if the transmission has failed

 

Setting range: 0 – 59 seconds (factory default: 10 sec-

 

onds)

[Mail resend times]:

Number of resend times if the E-mail transmission has

 

failed

 

Setting range: 0 – 255 times (factory default: 3 times)

[Error report]:

ON/OFF of error message sending function. Select [ON].

 

[OFF] is the factory default.

122