Canon SX80, SX800 Selecting a Logo at Startup, Selecting Aspect Ratio of Screen

Setting Display Status

[User screen settings] - [Projector on]

You can display a specified logo on a screen from the moment the projector is turned on to the moment it is ready fro pro- jection.

Skip	Projects an input signal immedi-
	ately after turning on the projec-
	tor.

Canon logo	Displays the Canon logo cap-
	tured at the factory.

User logo	Displays a user logo captured on
	the [Logo capture] screen.

Press the OK button to accept your setting and then press the MENU button.

•[Canon logo] is the factory default.

•[User logo] is available only when a user's logo has been registered.

You can select proper option corresponding to the aspect ratio of the projecting screen.

4:3	Select this when you use a screen with
	aspect ratio of 4:3.
	You can adjust the keystone distortion
	with D.SHIFT/KEYSTONE button.

16:9	Select this when you use a screen
	with aspect ratio of 16:9.
	You can adjust the keystone distortion
	with D.SHIFT/KEYSTONE button.

16:9	Select this when you use a screen
D. image with aspect ratio of 16:9.
shift	You can move the screen upward or
	downward with D.SHIFT/KEYSTONE
	button.

Press the OK button to accept your setting and then press the MENU button.

•[4:3] is the factory default.

•If you select [16:9 D. image shift], the keystone adjustment will be reset. For more details, refer to the page 61.

•[Auto] may be automatically selected for [Screen aspect] depending on the screen aspect setting.