Canon SX80, SX800 Relationship between Aspect and Screen Aspect, When Projecting an Image from a Computer

Relationship between Aspect and Screen Aspect

This section describes the relationship between screen aspect (P60) and aspect (P63). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type.

When Projecting an Image from a Computer

When the input signal is [ANALOG PC-1], [ANALOG PC-2], or [DIGITAL PC (SX80)], select screen aspect and aspect as follows according to the resolution of the image on the computer.

Screen	Screen Aspect	Resolution of Com-	Object of Projection		Aspect Setting
	Ratio Setting	puter Screen
		SXGA+		Project an image in a	[Auto]
				largest possible size on
					(or [4:3])
				the screen.
		4:3
				Project an image in a	[4:3]
		VGA, SVGA, XGA		largest possible size on
				the screen.

							Project the computer
				4:3
							screen in the original	[True size]
							resolution.
							Project an image in a
	4:3	[4:3]					largest possible size on	[Auto]
					WXGA		the screen.
							Project the computer
							screen in the original	[True size]
							resolution.
							(WUXGA not select-
							able)
							Project an image in a	[Auto]
					SXGA		largest possible size on
							the screen.
							Project the computer
				5:4			screen in the original	[True size]
							resolution.
					SXGA+		Project an image in a	[Auto]
							largest possible size on
							the screen.
				4:3
							Project an image in a	[Auto]
				VGA, SVGA, XGA			largest possible size on
							the screen.
							Project the computer
						4:3
16:9			[16:9]				screen in the original	[True size]
							resolution.
					WXGA		Project an image in a	[Auto]
							largest possible size on
							the screen.
					SXGA		Project an image in a	[Auto]
							largest possible size on
							the screen.
				5:4

Appendix

135