Troubleshooting

Cause

Countermeasure

 

 

The external monitor output is not

Turn on the external monitor output on the notebook com-

set on the notebook computer cor-

puter. To turn on the external monitor output, press the [LCD]

rectly.

or [VGA] function key or a key with an icon for the external

 

monitor, while holding down the [Fn] key on the keyboard of

 

the notebook computer. (P49)

 

The combination of keys used to perform this operation varies

 

among computer manufacturers. For more detailed informa-

 

tion, refer to the User's Manual that came with your com-

 

puter.

 

 

The displayed image is not the

Check whether the dual screen (multi-display) mode is

same as that displayed on the

selected on the computer. If the dual screen mode has been

computer.

selected, change it to the simultaneous display mode on the

 

computer.

 

The output setting method varies among computer manufac-

 

turers. For more detailed information, refer to the User's Man-

 

ual that came with your computer.

 

 

The lens cap is not removed.

Remove the lens cap.

 

 

A digital camera or USB flash memory is not recognized. (SX80)

Cause

Countermeasure

 

 

PictBridge is not supported.

Equipment not supporting PictBridge is not recognized.

 

Refer to the User's Manual for the relevant equipment.

 

(P108)

 

 

The mass storage class is not sup-

USB flash memory not supporting the mass storage class is

ported.

not recognized. Refer to the User's Manual for USB flash

 

memory. (P112)

 

 

You cannot hear sound.

Cause

Countermeasure

 

 

The audio cable is not connected

Check the cable connection of the audio cable. (P36, P37)

correctly.

 

 

 

The MUTE function is enabled.

Press the MUTE button on the remote control. (P69)

 

 

The volume level is adjusted to the

Press the VOL button on the remote control or the VOL+ but-

minimum.

ton on the top control to adjust the volume level. (P69)

 

 

An audio cable with a built-in resis-

Use an audio cable without a built-in resistor.

tor is used.

 

 

 

128