Glossary

* is only applicable to SX80

sRGB (P65, P89)

An international standard of color representation (color space) which is applied to general digital cameras, displays and oth- ers. In this projector, if you select [sRGB] in the [Image mode] setting, the projector can project the best-quality image conforming to the sRGB Standard.

DVI* (P40, P52)

A digital video signal connection interface for a computer. This interface allows digital data to be transmitted without converting to analog data, assuring high image quality with no signal degradation.

The DVI-I (integrated) connector can be used to transmit both an analog video signal and digital video signal.

Digital PC* (P27, P40)

A signal system used to send digital information of individual display dots. This system is free from deterioration of image quality because of no analog conversion. Connect the DVI output terminal on the computer and ANALOG PC-1/DVI-I IN terminal on this projector with an optionnal DVI digital cable (LV-CA29). Select [DIGI- TAL PC] at projection.

Analog PC (P27, P38, P78)

A signal system used to send analog signal information of R (red), G (green), and B (blue). Connect the analog RGB output terminal on your computer to ANALOG PC-1/DVI-I IN terminal or ANALOG PC-2/ COMPONENT IN terminal on the projector (in SX800, ANALOG PC-1 IN terminal or ANALOG PC-2/COMPONENT IN termi- nal), and select [ANALOG PC-1] or [ANA- LOG PC-2] at the time of projection.

HDMI* (P42, P52)

An abbreviation for High-Definition Multi- media Interface, which is a digital video signal connection interface for AV equip- ment. It can transmit non-compressed images and audio signals simultaneously. It supports digital contents copy-protected with the HDCP technology. The projector supports HDMI 1.3 standard (10-bit deep color).

HDCP*

An abbreviation of High-bandwidth Digital Content Protection which is an encryption technology for copy protection of digital image signals. In this projector, you can project digital contents copy-protected with the HDCP technology.

VIDEO (P27, P43, P78)

An output terminal widely used in an AV equipment. It is also called as a composite output terminal (pin terminal or RCA termi- nal). For more details, refer to "Composite".

Composite (P27, P43)

A video signal system used to send a brightness signal (Y) and a color signal

(C)together. Connect the composite out- put (RCA) terminal on the AV equipment and the VIDEO IN terminal on this projec- tor with a video cable. Select [VIDEO] at projection.

S-VIDEO* (P27, P43, P78)

A signal system (YC separation signal) used to send a brightness signal (Y) and color signal (C) separately. Connect the S- video terminal on the AV equipment and the S-VIDEO IN terminal on this projector with an S-video cable. Select [S-VIDEO] at projection.

140