Setting an IP Address (SX80)
6 Click [Apply], and then click the [OK] button when the "Save and apply settings. OK?" message appears.
This completes the IP address setting of the projector.
■If You Want to Reset the Network Setting1 Access to the projector from a web browser by referring to the step 1 on "Setting the Error Notification Message (P121).”
2 Click [Initialize] in the network setting screen (P122).
3 Click the [OK] button when “Initialize network settings?” message appears.
To restore the settings with the projector operation, execute [Network setting initializa- tion] from the menu.
■Error Notification MessageIf errors occur in the projector, the following messages are sent.
Error list
| Error name | Temperature abnormality |
| |
|
|
|
| |
|
| The temperature inside the projector is too high for some |
| |
Errors related to |
| reason or the outside air temperature is higher than the |
| |
| specified one. If the problem is inside the projector, |
| ||
temperature | Text | check whether the projector is installed and operated |
| |
|
| normally, turn off the projector to cool its inside, and retry |
| |
|
| projection. If the same warning occurs again, the projec- |
| |
|
| tor may be defective. Contact your dealer. |
| |
|
|
|
| |
| Error name | Faulty lamp |
| |
Errors related to |
|
|
| |
| The lamp has burnt out. Replace the lamp with a new |
| ||
the lamp | Text | one. If the same warning occurs again, the lamp drive | Operating | |
|
| circuit may be defective. Contact your dealer. | ||
|
|
| ||
|
|
|
| |
| Error name | Faulty lamp cover |
| |
|
|
|
| |
Errors related to |
| The lamp cover is open. Check whether the lamp cover | the | |
| is installed properly. If it is installed properly, the lamp | |||
the lamp cover | Text | Projector | ||
dealer. | ||||
|
| cover detection switch may be defective. Contact your |
| |
|
|
| over | |
Errors related to | Error name | Faulty cooling fan | ||
|
| Network | ||
| The cooling fan or another component may be defective. | |||
the cooling fan | Text | |||
| ||||
Contact your dealer. |
| |||
|
|
| ||
|
|
|
| |
| Error name | Faulty power supply |
| |
Errors related to |
|
|
| |
| The voltage of part of the power supply is abnormally |
| ||
the power supply | Text | high or any other problem has occurred in the power |
| |
|
| supply. Contact your dealer. |
| |
|
|
|
| |
Other types of | Error name | Unknown Error |
| |
errors | Text | Codes in hexadecimal numbers* |
| |
|
|
|
|
* Contact your Canon dealer.
123