Adjusting Image

Adjusting Keystone Distortion

The D.SHIFT/KEYSTONE button corrects the keystone distortion.

•Keystone can be adjusted within the range of ± 20 degrees. If the keystone distortion is too large to adjust, move the projector installation position. (P33)

•The amount of adjustment may be smaller depending on type of input signal.

•The result of keystone adjustment is memorized. If you place the projector at the same position, the keystone adjustment is not necessary.

•Signals are processed digitally when keystone distortion is corrected. The image may look different from the original one. In addition, the aspect ratio of the image may change.

•If you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis- abled. Project the image at right angle to the screen.

■Auto adjustment

Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button.

■Manual adjustment

1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.

 

Remote control

 

 

Top control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Press the pointer buttons to adjust the focus.

Remote control

 

 

Top control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[<]: Reduces the length of

 

 

 

[<]: Reduces the length of

the upper edge.

 

 

 

the lower edge.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

58