Carrier PSD006-070, PSV, 50PSH Set Points, Weekly Schedule, Exception, Schedules 1

APPENDIX A — WSHP OPEN SCREEN CONFIGURATION (cont)

SCREEN NAME		POINT NAME	PASSWORD	EDITABLE	RANGE	DEFAULT	NOTES
			LEVEL
		Occupied Heating		X	40 - 90 ° F	72 ° F	Defines the Occupied
							Heating Set Point
		Occupied Cooling		X	55 - 99 ° F	76 ° F	Defines the Occupied
							Cooling Set Point
		Unoccupied Heating		X	40 - 90 ° F	55 ° F	Defines the Unoccupied
							Heating Set Point
		Unoccupied Cooling		X	55 - 99 ° F	90 ° F	Defines the Unoccupied
							Cooling Set Point
		Effective Heating		X	0 - 10 ° F		Takes into effect bias (maximum
		Set Point					allowable set point deviation)
		Effective Cooling		X	0 - 10 ° F		Takes into effect bias (maximum
		Set Point					allowable set point deviation)
							Uses historical data to calculate
		Optimal Start					ramp up time so as to be at set point
Configuration							at occupied/unoccupied time
			User/Admin				Defines the control set point used
	→
		Occupied RH					during occupied periods (Viewable
			Password level
				X	0 - 100%	65%	only if Humidity Sensor = Installed/
		Set Point	access				Determines when to start
Set Points
							Dehumidification when occupied)
							Defines the control set point used
		Unoccupied RH					during unoccupied periods
				X	0 - 100%	90%	(Viewable only if Humidity Sensor =
		Set Point
							Installed/Determines when to start
							Dehumidification when unoccupied)
							Defines the control set point used to
		DCV CTRL Start		X	0 - 9999 ppm	500 ppm	start increasing ventilation during
		Set Point					occupied periods (Viewable only if
							Ventilation DMP Type = DCV)
							Defines the control set point
							used to define where the ventilation
		DCV Max CTRL					will reach its maximum limit during
				X	0 - 9999 ppm	1050 ppm	occupied periods (Viewable only if
		Set Point
							Ventilation DMP Type = DCV/Used
							to determine DCV ending control
							point)
		Start Time		X	00:00 - 23:59	06:00	Defines the start time for an
							occupied period
		End Time		X	00:00 - 24:00	18:00	Defines the ending time of an
							occupied period
Configuration		Mon		X	No/Yes	Yes	Determines if this day is included
							in this schedule
	→	Tue		X	No/Yes	Yes	Determines if this day is included
			User/Admin				in this schedule
Schedule							Determines if this day is included
		Wed	Password level	X	No/Yes	Yes
							in this schedule
	→		access
		Thur		X	No/Yes	Yes	Determines if this day is included
							in this schedule
Weekly Schedule		Fri		X	No/Yes	Yes	Determines if this day is included
							in this schedule
		Sat		X	No/Yes	No	Determines if this day is included
							in this schedule
		Sun		X	No/Yes	No	Determines if this day is included
							in this schedule
		Start Month		X	0 - 12	0	Defines the start month of this
Configuration							hoilday schedule
		Start Day		X	0 - 31	0	Defines the start day of this holiday
	→
							schedule
		Start Time	User/Admin	X	00:00 - 23:59	0:00	Determines the start time for this
Schedule							schedule
			Password level
							Defines the month to end this
	→	End Month	access	X	0 - 12	0
							hoilday schedule
Exception		End Day		X	0 - 31	0	Defines the day to end this holiday
							schedule
Schedules 1 - 12
		End Time		X	00:00 - 24:00	0:00	Determines the time to end this
							schedule
	LEGEND
BAS — Building Automation System
DCV	— Demand Controlled Ventilation
IAQ	— Indoor Air Quality
OAT	— Outdoor Air Temperature
RH	— Relative Humidity
SAT — Supply Air Temperature
SPT	— Space Temperature
TPI	— Third Party Integration

60