IP Router - Release 1.8 5-11
Profile Directory:Remote Profile
Remote (WAN) Profile
<NAT Bypass Subnets >
Use this option to access the Static NAT Addresses window which allows the operator to
configure static bi-directional NAT mappings between local server addresses and public
addresses. See Static NAT Addresses on page 5-22, for more information.
<Static Addresses >
This option is used to access the Static Addresses window which allows the operator to
configure static addresses for the remote unit. See Static Addresses on page 5-26, for more
information.
<Firewall Filters >
This option is used to access the Firewall Rules screen which allows the operator to
establish firewall filters for this remote unit. See Firewall Filters on page 5-29 , for more
information
<Filter Network/Server >
This option is used to access the Filter Network/Server screen which allows the operator to
establish network and server filtering for this remote unit. See Filter Network/Server on
page5-35, for more information.
<Spanning Tree>
Configures the global setup for using the Spanning Tree Algorithm as specified in the IEEE
802.1D specification. See Spanning Tree on page5-40, for more information. Note: IP
Mode must be set to <Bridged> for this option to display in the scrolled list.