IP Router - Release 1.8 3-13
Profile Directory: Router Card Profile
SNMP
This window defines the SNMP Trap Destinations to which the Router will report alarm
information.
Name
Enter the community name(s) of the devices to which the Router will report. The default community
name is public. To enter a new community name, highlight the field and type the desired value , with
a maximum of 10 characters.
Address
Enter the corresponding IP Address of the device that was entered in the Name field.
Location
<Local LAN>, <RemoteUnit>
Available options are the <Local LAN> and all defined Remote (WAN) Units, defined in the Profile
Directory (there can be up to 24).
SNMP
Setup
Window