1-2 IP Router - Release 1.8
Introduction
Overview
Overview
This manual covers the Router menu-driven user interface only, all other information
for the Router can be found in the Adit 600 User Manual.
The Router can be configured using CLI via telnet or through the Router Menu-driven
Software.
Installation
The IP Router card can be installed into any of the service card slots (1-6) of the Adit
600 chassis. This card is hot-swappable, therefore the card can be removed and
replaced without bringing down the system or with or without power to the unit.

Install a Router Card

1. Slide the Router card into a service card sl ot of the chassis.
2. Press firmly into slot to engage, until card is se ated completely.
3. Card has completed bootup when a solid Red CRD light (an LED) is displayed.
Maneuvering in the System
[TAB] moves from one field to the next.
Keyboard arrows move to the next field in the direction of the arrow.
[ ] Items in brackets are scrollable opt ions. With the Spacebar the operator can move
through the selections.
[ENTER] displays the window for the selected feature or to enter a alphanumeric value.
[ESC] Exit and return to previous window or to the Main Menu.
Help Bar - is displayed along the bottom of the window and lists options for the
selected feature.
The Router software contains three different field types that may be used in entering
information: scroll, select and edit.