5-14 IP Router - Release 1.8
Profile Directory:Remote Profile
Security/Options
Security/Options Fields
Authentication By Remote
User ID: Local Profile Name
This field displays the User ID of the Local Unit.
Authentication of Remote
This fields defines the parameters the remote unit expects to receive from this local unit.
Protocol
This field displays the authentication protocol, if any, to be used by remote units when
authenticating the local unit. The authentication protocol is defined on the Local (LAN)
Security/SNMP window.
User ID
<Remote Profile Name> Displays the current Remote Profile name
<Remote Custom Name> User-defined name, up to 32 characters. This user ID is sent
during the authentication process.
Security Server
Displays the defined method as to where the remote device will be authenticated. This option is
set in the Router CARD Setup - > Security/SNMP window.
Compression
<Enabled> Will negotiate compression with a remote device.
<Disabled> If the remote device will not negotiate compression, leave this field as
Disabled.
Typical Data
This allows the data compression to be customized to the type of data on a given network.
<Easy to Compress>. If typical compression ratios are greater than 2/1, then this setting
should achieve the best compression. This is the default.
<Hard to Compress> If compression ratios are less than 2/1.