IP Router - Release 1.8 1-5
Introduction
Connecting to the Router
Connecting to the Router

Establish a Telnet Session

1. Use the telnet {rtr_card-addr} CLI command to connect to the Router
card. The following example is when the router is located in slot 5.
> telnet 5
Connected.
Escape character is ’^]’.
Attempting Carrier Access QTSR connection...
QTSR [Sat Apr 10, 2004 10:51:23] (<CR> to login)
2. Select [ENTER] or <CR> to log in.
Password >
3. Enter default password (admin) and press [ENTER].
Password >*****
Select a terminal type...
(<space> or <back-space> to toggle, <CR> to accept)
Terminal: <VT100>
4. Select Terminal Type: scroll through options with the [SPACEBAR] and then
[ENTER] to select. Recommended <generic>.
Terminal: <generic>