4-4 IP Router - Release 1.8
Profile Directory: Local Profile
LAN (Local) Profile Setup
In addition to the fields on this screen , there are several other areas that dire ctly relate
to the communication abilities of the Router. You may use the fields at the bottom of
this screen to access the following areas:
lDefining static addresses at the local unit
lEstablishing static networks
lEstablishing Remote (WAN) advertising
lEstablishing DHCP Server/BOOTP Relay Agent parameters
lDefining data filters
The Router can accommodate a maximum of 500 filters, such as those created when
establishing static routes or data filters. The following entries consume a filter:
lConfigured address, custom and protocol filters
lStatic IP networks and static IPX networks
lEnabling any learned items listed on the A dvertise Network/Server screen or
Filter Network/Server screen
lStatic IP and MAC Addresses
lFirewall filters
In a large network, it is necessary to selectively use of each of these options so that the
number of configured filters is within the maximum allowed.
The Local Profile is used to define the Local (LAN) port parameters for the unit at the
present location.