IP Router - Release 1.8 5-37

Profile Directory:Remote Profile

Filter Network/Server
5. Select <Learn> or <Filter> and press [ENTER].
6. To Manually configure a service (with <IPX Servers> only), select [CTRL A]
to add a Filter.
Filter Network/Server Fields

Setup

Use this field to identify which networks or server types you wish to review and filter.
<IP Networks>, <IPX Networks> or <IPX Servers>

Selected Items (Filter/Learn)

<Filter> (default) The Router will learn all networks/servers and advertise them to the LAN.
This mode is particularly useful for small networks with few items to be learned/advertised.
Customize the advertised networks/servers in one of two ways; <Learn> or [CTRL A]
<Learn> Under this mode, learning and advertising are disabled until a specific server type is
selected from the displayed servers or is manually added. The <Learn> mode is much better
suited for larger networks, as specifying which networks/servers you wish the Router to learn
may consume less filters than specifying which networks/servers you Do Not want learned.
[CTRL A] keys to manually configure a service to be filtered or learned. When manually
configuring a service, the following prompt is displayed. You must define a server type,
however the corresponding server name may be left blank. If a server name is not defined, all
services of the specified type will be learned, regardless of the name.