|
| Holliston™ |
|
| |
| Fan Preparation |
|
|
| |
Perma•Lock™ Hardware (not to scale) |
|
|
|
| |
|
| Canopy Cover |
|
|
|
Perma•Lock™ Downrod | Hanging Adapter Cover | Ring | Allen Wrench | (6) | |
and Ball Assembly |
|
| Uplight Bulbs | ||
|
|
|
|
|
|
IMPORTANT SAFETY INFORMATION:
Before starting the installation of your ceiling fan, install the threaded downrod into the motor coupling and lock the assembly.
Prepare for fan installation as follows:
Step 4a. Remove the paper shield from the motor as shown in Figure #1.
Step 4b. Using the provided Allen wrench (attached to the paper motor shield), loosen the Allen set screw making sure that end of the Set Screw can not be seen within the motor coupling as shown in (Figure #2). If so, you will need to unscrew the Set Screw so that the tip of the Set Screw does not remain in the path of the downrod as shown in (Figure #3).
CAUTION: Failure to fully lock in the downrod before securely tightening the Allen set screw may cause the fan to separate from the downrod and fall during normal operation.
PAPER MOTOR
SHIELD
Figure #1
Figure #2
Figure #3
9
