Holliston™
Blade Installation
Blade Hardware (not to scale)
Blades (5) | Blade Irons (5) | Blade Iron | Washers (16) | Blade Screws (16) | Phillips | |
Screws | ||||||
|
|
|
| Screwdriver |
Step 9a. Remove the five shipping blocks, and screws as shown in Figure #2. DO NOT discard the ten (10) screws; you will need them for installing the blades onto the fan.
Attach Blade Irons
Step 9B. Attach a blade to a blade iron by first pressing the blade iron onto the blade, then attaching the blade iron using three blade screws and blade washers as shown in Figure #3. Using the provided screwdriver, tighten securely by hand only. Repeat for each blade assembly.
Blade Installation
Step 9c. Before attempting to attach the blades, review Figure #4 for blade placement on the flywheel. The numbers and lines show screw placement when attaching the five blade irons and blades assemblies to the fan.
SHIPPING
BLOCKS 
SHIPPING BLOCKS
SCREWS
| Figure #2 |
|
|
BLADE IRON | BLADE WASHER |
| |
SCREWS |
|
BLADE |
|
BLADE IRON
Figure #3
BLADE AND
BLADE HOLDER
FLYWHEEL
Figure #4
13
