Cisco Systems 12000 series ATM Line Card Route Memory Options, LC-Slot3#show hardware

Line Card Memory

LC-Slot3#show hardware

Cisco Internetwork Operating System Software IOS (tm) GS Software (GLC1-LC-M), Experimental Version

12.0(20050203:211853) [samson-1g_cli_ci 144] Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Wed 16-Feb-05 13:17 by samson

Image text-base: 0x40010FC8, data-base: 0x41400000

ROM: System Bootstrap, Version 12.0(20030207:104405) [jkuzma-rommon 1.8] RELEASE SOFTWARE

LC-Slot3 uptime is 5 minutes

Running default software

cisco GE-4 (R7000) processor (revision 0x02) with 524289K bytes of memory.

R7000 CPU at 400Mhz, Implementation 39, Rev 3.3, 256KB L2 Cache Last reset from power-on 4 GigabitEthernet/IEEE 802.3 interface(s)

DRAM DIMM Slot 1: 256M found, Slot 2: 256M found

Configuration register is 0x0

In this example, two 256-Mbyte memory modules are installed and therefore the memory is not user upgradable.

ATM Line Card Route Memory Options

Route memory runs the Cisco IOS software image and stores updated network routing tables downloaded from the route processor (RP). Table 16 lists the available route memory configurations and associated product numbers of the memory modules used for upgrading route memory on ATM line cards.

Table 16	Route Memory Configurations for ATM Line Cards
Total Route Memory		Cisco Product Number	DIMM Module	Route Memory DIMM Sockets
64 MB		MEM-GRP/LC-64=1	1 64-MB DIMM	DIMM0 or DIMM1
128 MB		MEM-DFT-GRP/LC-1282	1 128-MB DIMM	DIMM0 or DIMM1
128 MB		MEM-GRP/LC-128=3	1 128-MB DIMM	DIMM0 or DIMM1
256 MB		MEM-GRP/LC-256=	2 128-MB DIMMs	DIMM0 and DIMM1
512 MB		MEM-LC-ISE-512=4	2 256-MB SODIMM	SODIMM0 and SODIMM1
512 MB		MEM-LC-ISE-512A=	1 512-MB SODIMM	SODIMM0
1 GB		MEM-ISE-512A-2PK=	2 512-MB SODIMM	SODIMM0 and SODIMM1

1.This option adds a second 64-MB DIMM for a total of 128 MB for line cards that are equipped with 64 MB.

2.Standard (default) DIMM configuration for the processor on Engine 0 and Engine 2 line cards.

3.This option allows you to order a spare module or add a second 128-MB DIMM for a total of 256 MB for line cards that are already equipped with one 128-MB DIMM.

4.Standard (default) route memory configuration for the processor on ATM ISE line cards is 512-MB.

ATM Line Card Installation and Configuration

OL-13004-01 47