Line Card Memory
Step 9 Gently press down the SODIMM using your index fingers, distributing even pressure across the module until it locks into the tabs (Figure 30b).
Caution Excessive pressure can damage a SODIMM socket.
Step 10 Verify that the release levers are flush against the side of the socket. If they are not, the SODIMM might not be seated properly.
Step 11 If the module appears misaligned, carefully remove it and reseat it, ensuring that the release lever is flush against the side of the SODIMM socket.
Step 12 If there is a retaining clip, insert it by sliding the clip between the metal strain relief and the plastic latch (Figure 31).
Figure 31 | Inserting the Retaining Clip |
75758
The clip is properly installed when the clip detente protrudes below the strain relief and plastic latch (Figure 32).
ATM Line Card Installation and Configuration
| 57 |
| |
|
|
