Cisco Systems 12000 series specifications Product Overviews, Related Documentation

Product Overviews

Related Documentation

This publication describes the basic installation and configuration of a ATM line card. For complete software and ATM configuration information, refer to the following publications:

•Cisco 12000 Series Router Installation and Configuration Guides

•Cisco 12000 Series Internet Router Configuration Guide for Cisco IOS Release 12.0S

•Cisco IOS Configuration Fundamentals Configuration Guide

•Cisco IOS Configuration Fundamentals Command Reference

•Cisco IOS Release 12.0S Release Notes for Cisco 12000 Series Routers

•4-Port ATM ISE Line Card Feature Module

•Regulatory Compliance and Safety Information for Cisco 12000 Series Internet Routers

See the “Obtaining Documentation” section on page 62 for information on how to obtain these publications.

Product Overviews

This section includes product overview information for each ATM line card:

•1-portOC-12c/STM-4c ATM Line Card Overview, page 4

•4-portOC-3c/STM-1 ATM Line Card Overview, page 5

•4-portOC-12c/STM-4c ATM Line Card Overview, page 5

•8-portOC-3c/STM-1 ATM Line Card Overview, page 6

•4-portOC-12c/STM-4c ISE and 4-portOC-3c/STM-1 ISE ATM Line Card Overview, page 6

1-port OC-12c/STM-4c ATM Line Card Overview

The 1-port OC-12c/STM-4c ATM line card provides the Cisco 12000 series router with one 622-Mbps ATM interface. The card interfaces to the router’s switch fabric and provides one OC-12c/STM-4c duplex SC single-mode or multimode SONET/SDH connection. This connection is concatenated, which provides for increased efficiency by eliminating the need to partition the bandwidth.

Figure 1 illustrates the single-mode, intermediate-range 1-port OC-12c/STM-4c ATM line card.

Figure 1 1-port OC-12c/STM-4c ATM Line Card—Single-Mode

ACTIVECARRIERRXCELL

0

1 2 3

OC-12/STM-4 SM IR ATM

4 101924

			1	Ejector lever	3	Status LEDs
2				Port 0	4	Display LEDs
		ATM Line Card Installation and Configuration
	4						OL-13004-01