Cisco Systems 1240AG manual Mounting Plate Holes

Chapter 2 Installing the Access Point

Mounting Above a Suspended Ceiling

The bracket mounting clip requires the use of two mounting clip holes on the mounting plate (see Figure 2-6).

Figure 2-6 Mounting Plate Holes

1

Bracket mounting clip holes

Follow these steps to mount the access point above a suspended ceiling.

Step 1 Insert the bracket mounting clip’s tab into the large hole on the access point mounting plate.

Step 2 Place the clip over the T-bar box hanger and secure it to the access point mounting plate (see Figure 2-7) with the 1/4-20 fastener (supplied with the T-bar hanger).

Figure 2-7 Access Point Mounting Plate

135498

Note The illustration shows the access point mounting plate mounted perpendicular to the T-bar box hanger. You can also mount the bracket parallel to the T-bar box hanger.

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-8371-05 2-13