Cisco Systems 1240AG manual Issuing the Cisco IOS Command Using the CLI

Contents

Inline Power Status Messages		3-7
Configuring Power Using the CLI		3-9
Issuing the Cisco IOS Command Using the CLI 3-10
Configuring the Access Point System Power Settings Using a Browser 3-11
Running the Carrier Busy Test	3-13
Running the Ping Test 3-14
Resetting to the Default Configuration		3-14
Using the MODE Button	3-15
Using the Web Browser Interface		3-15
Reloading the Access Point Image 3-16
Using the MODE Button	3-16
Web Browser Interface	3-17

Browser HTTP Interface	3-17
Browser TFTP Interface	3-18
Obtaining the Access Point Image File		3-19
Connecting to the Access Point Locally		3-20
Obtaining the TFTP Server Software		3-20

C H A P T E R 4	Troubleshooting 1240AG Series Lightweight Access Points				4-1
	Guidelines for Using Cisco Aironet Lightweight Access Points				4-2
	Using DHCP Option 43	4-2
	Checking the Lightweight Access Point LEDs 4-3
	Low Power Condition for Lightweight Access Points			4-5
	Intelligent Power Management		4-5
	Configuring Power Using Controller CLI Commands 4-6
	Manually Configuring Controller Information Using the Access Point CLI					4-7
	Configuring Controller Information		4-8
	Clearing Manually Entered Controller Information			4-8
	Manually Resetting the Access Point to Defaults			4-8
	Returning the Lightweight Access Point to Autonomous Mode				4-9
	Using a Controller to Return the Access Point to Autonomous Mode					4-9
	Using the MODE Button to Return the Access Point to Autonomous Mode 4-9
	MODE Button Setting	4-10
	Obtaining the Autonomous Access Point Image File			4-10
	Connecting to the Access Point Locally		4-11
	Obtaining the TFTP Server Software		4-12

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-8371-05 v