Cisco Systems 1240AG manual Declaration of Conformity for RF Exposure

Appendix B Declarations of Conformity and Regulatory Information

Declaration of Conformity for RF Exposure

For 54 Mbps, 5 GHz access points, the following standards were applied:

•	Radio:	EN 301.893
•	EMC:	EN 301.489-1, EN 301.489-17
•	Safety:	EN 60950

The following CE mark is affixed to the access point with a 2.4 GHz radio and a 54 Mbps, 5 GHz radio:

Declaration of Conformity for RF Exposure

The radio has been found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices as defined in Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. The equipment should be installed more than 20 cm (7.9 in.) from your body or nearby persons.

The access point must be installed to maintain a minimum 20 cm (7.9 in.) co-located separation distance from other FCC approved indoor/outdoor antennas used with the access point. Any antennas or transmitters not approved by the FCC cannot be co-located with the access point. The access point’s co-located 2.4 GHz and 5 GHz integrated antennas support a minimum separation distance of

8 cm (3.2 in.) and are compliant with the applicable FCC RF exposure limit when transmitting simultaneously.

Note Dual antennas used for diversity operation are not considered co-located.

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-8371-05 B-7