2-15
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
OL-8371-05
Chapter2 Installing the Access Point
Cable Security Bracket
Figure2-8 Access Point with Mounting Plate and Cable Security Bracket
Removing the Cable Security Bracket
The cable security bracket (see Figure 2-9) is designed to help prevent someone from using the Mode
button to reset the access point to default values or from using the serial console cable to access the
access point’s CLI interface or from removing the Ethernet cable. If this security protection is not
considered necessary, you can remove the cable security bracket.
Figure2-9 Cable Security Bracket Screws
1Mounting plate 3Access point
2Cable security bracket
135496
2.4 GHz RIGHT / PRIMARY
2.4 GHz LEFT
STATUS
RADIO
ETHERNET
ETHERNET 48VDC
3
2
1
1Cable security bracket 3Mounting plate
2Cable security bracket screws