Cisco Systems 1240AG manual Access Point Specifications

A P P E N D I X C

Access Point Specifications

Table C-1lists the technical specifications for the 1240AG series access point.

Table C-1	Access Point Specifications
		802.11G Radio Specifications
Category		802.11b	802.11g	802.11A Radio Specifications
Size		6.6 in. W x 8.5 in. D x 1.1 in. H
		16.8 cm W x 21.6 cm D x 2.8 cm H
Indicators		Three indicators on the 2.4 Ghz end panel: Ethernet traffic, status, and radio traffic.
Connectors		2.4 GHz end panel (left to right)
		Left RP-TNC antenna connector; RJ-45 connector for serial console port connections; RJ-45
		connector for 10BASE-T or 100BASE-T Ethernet connections; power connector (for plug-in
		48VDC AC power module); right (primary) RP-TNC antenna connector.
		5-GHz end panel (left to right)

Left RP-TNC antenna connector; right (primary) RP-TNC antenna connector.

Input Voltage	36 to 57 VDC (48 VDC nominal)
Input Power	12.95 W (Up to 15.4 W with a 100 m CAT 5 Ethernet cable)—maximum
Operating Temperature	Base unit:
	–4 to 113oF (–20 to 45oC) without mounting bracket installed
	–4 to 131oF (–20 to 55oC) with mounting bracket installed
	1240AG series power module:
	32 to 104oF (0 to 40oC)
Storage Temperature	-40 to 185oF (-40 to 85oC)
Humidity	10 to 90% non-condensing
Weight	Without mounting hardware:
	2 lbs (0.9 kg)
Modulation	Complementary Code Keying		Orthogonal Frequency Division Multiplex (OFDM)
	(CCK)
Subcarrier modulation	BPSK (1 Mbps)		BPSK (6 and 9 Mbps)	BPSK (6 Mbps and 9 Mbps)
	QPSK (2 Mbps)		QPSK (12 and 18 Mbps)	QPSK (12 Mbps and 18 Mbps)
	CCK (5.5 and 11 Mbps)		16-QAM (24 and 36 Mbps)	16-QAM (24 and 36 Mbps)
			64-QAM (48 and 54 Mbps)	64-QAM (48 and 54 Mbps)
		Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
OL-8371-05					C-1