Cisco Systems 1240AG manual Network Example with Lightweight Access Points

Chapter 1 Overview

Network Example with Lightweight Access Points

Network Example with Lightweight Access Points

The lightweight access points support Layer 3 network operation. Lightweight access points and controllers in Layer 3 configurations use IP addresses and UDP packets, which can be routed through large networks. Layer 3 operation is scalable and recommended by Cisco.

This section illustrates a typical wireless network configuration containing lightweight access points and a Cisco Wireless LAN Controller (see Figure 1-13).

Figure 1-13 Typical Lightweight Access Point Network Configuration Example

LWAPP

LWAPP

158085

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-8371-05 1-13