xxvii
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-03
Preface

Audience

This guide is for the networking professional managing the Catalyst 3550 switch, hereafter referre d to
as the switch or the multilayer switch. Before using this guide, you should have experience working with
the Cisco IOS and be familiar with the concepts and terminology of Ethernet and local area networking.

Purpose

This guide provides the information you need to configure Layer 2 and Layer 3 software fe atures on your
switch. The Catalyst 3550 switch is supported by either the standard multilayer software image (SMI)
or the enhanced multilayer software image (EMI). The EMI provides a richer set of enterprise-class
features, including hardware-based IP unicast and multicast routing, inter-VLAN routing, routed access
control lists (ACLs), and the Hot Standby Router Protocol (HSRP). All Ca talyst 3550 Gigabit Ethernet
switches are shipped with the EMI pre-installed. Catalyst 3550 Fast Ethernet switches are shipped with
either the SMI or the EMI pre-installed. After initial deployment, you can order the En hanced Multilay er
Software Image Upgrade kit to upgrade Catalyst 3550 Fast Etherne t sw itch es fr om ru nning the SMI t o
the EMI.
This guide provides procedures for using the commands that have been created or c hanged for use with
the Catalyst 3550 switch. It does not provide detailed information about these commands. For detailed
information about these commands, refer to the Catalyst 3550 Multilayer Switch Command Reference
for this release. For information about the standard IOS Release 12.1 commands, refer to the IOS
documentation set available from the Cisco.com home page at Service and Support > Technical
Documents. On the Cisco Product Documentation home page, select Release 12.1 from the Cisco IOS
Software drop-down list.
This guide also includes an overview of the Cluster Man agem ent Suit e ( CM S) we b- based , switc h
management interface, which helps you create and manage clusters of switches. This guide does not
provide field-level descriptions of the CMS windows nor does it provide the procedures for configuring
switches and switch clusters from CMS. For all CMS window descriptions and procedures, refer to the
CMS online help, which is integrated with the software image.
This guide does not describe system messages you might encounter or how to install your switch. For
more information, refer to the Catalyst 3550 Multilayer Switch System Message Guide for this release
and to the Catalyst 3550 Multilayer Switch Hardware Installation Guide.