20-31
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-03
Chapter20 Configuring QoS Configuring QoS
To delete an existing class map, use the no class-map class-map-name [match-all | match-any] global
configuration command. To remove a match criterion, use the no match {access-group
acl-index-or-name | ip dscp | ip precedence} class-map configuration command.
This example shows how to configure the class map called class1. The class1 has one match criterion,
which is access list 103. It permits traffic from any host to any destination that matches a DSCP value
of 10.
Switch(config)# access-list 103 permit any any dscp 10
Switch(config)# class-map class1
Switch(config-cmap)# match access-group 103
Switch(config-cmap)# end
Switch#
Step4 class-map class-map-name [match-all |
match-any]Create a class map, and enter class-map configuration mode.
By default, no class maps are defined.
•For class-map-name, specify the name of the class map.
•(Optional) Use the match-all keyword to perform a logical-AND
of all matching statements under this class map. All match cr iteria
in the class map must be matched.
•(Optional) Use the match-any keyword to perform a logical-OR
of all matching statements under this class map. One or more
match criteria must be matched.
If neither the match-all or match-any keyword is specified, the
default is match-all.
Note Because only one match command per class map is supported,
the match-all and match-any keywords function the same.
Step5 match {access-group acl-index-or-name |
ip dscp dscp-list | ip precedence
ip-precedence-list}
Define the match criterion to classify traffic.
By default, no match criterion is supported.
Only one match criterion per class map is supported, and only one ACL
per class map is supported.
•For access-group acl-index-or-name, specify the number or name
of the ACL created in Step 3.
•For ip dscp dscp-list, enter a list of up to eight IP DSCP values to
match against incoming packets. Separate each value with a space.
The range is 0 to 63.
•For ip precedence ip-precedence-list, enter a list of up to eight
IP-precedence values to match against incoming packets. Separate
each value with a space. The range is 0 to 7.
Note You can use the match ip dscp dscp-list class-map
configuration command only in a policy map that is attached to
an egress interface.
Step6 end Return to privileged EXEC mode.
Step7 show class-map Verify your entries.
Step8 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose