Cisco Systems 78-11741-02 manual Applying Nhrp Rates to Specific Destinations Example, IPC-57

Configuring IP Addressing

IP Addressing Examples

Router C Configuration

ip cef

ip cef accounting non-recursive

!

interface Loopback0

ip address 140.206.58.131 255.255.255.255 no ip directed-broadcast

no ip mroute-cache

!

interface ATM0/0 no ip address

no ip directed-broadcast no ip mroute-cache

atm pvc 5 0 5 qsaal atm pvc 16 0 16 ilmi

!

interface ATM0/0.1 multipoint

ip address 140.206.58.56 255.255.255.192 no ip directed-broadcast

ip nhrp network-id 1

ip nhrp trigger-svc 100 50

ip ospf network point-to-multipoint atm pvc 111 0 85 aal5snap inarp 5 atm esi-address 525354555356.01

!

!

interface Fddi4/0/0

ip address 10.3.1.56 255.255.255.0 no ip directed-broadcast

no ip mroute-cache no keepalive

!

!

router ospf 1 passive-interface Fddi4/0/0 network 10.3.1.0 0.0.0.255 area 1 network 140.206.58.0 0.0.0.255 area 1

!

router bgp 7170

no synchronization network 140.206.0.0

neighbor 10.3.1.45 remote-as 103 neighbor 140.206.59.130 remote-as 7170 neighbor 140.206.59.130 update-source Loopback0 neighbor 140.206.59.130 next-hop-self

Applying NHRP Rates to Specific Destinations Example

In the following example, only the packets that pass extended access list 101 are subject to the default SVC triggering and teardown rates:

interface atm0/0/0.1 multipoint ip nhrp interest 101

!

access-list 101 permit ip any any

access-list 101 deny ip any 10.3.0.0 0.0.255.255

Cisco IOS IP Configuration Guide

IPC-57