Cisco Systems 78-11741-02 manual IN-569

Index

broadcast or nonbroadcast networks, configuring

for	IPC-226
checksum pacing IPC-236
Cisco implementation				IPC-223
complex configuration (example)						IPC-249,IPC-388
conditional default origination
(example)		IPC-252,IPC-391
configuring		IPC-231
configuration (examples)					IPC-241
configuration task list				IPC-224
cost differentiation			IPC-232
default external route cost, assigning							IPC-229
default routes, generating					IPC-231
distance	IPC-233
DNS name lookup			IPC-232
enabling	IPC-225
flooding reduction			IPC-238
hello interval, setting				IPC-225
ignore MOSPF LSA packets IPC-238
interface, configuration				IPC-225
IP multicast		IPC-223
IRDP advertisements to multicast address,
sending		IPC-29
link-state retransmission interval, setting								IPC-225
LSA flooding, blocking				IPC-238
LSA group pacing IPC-235,IPC-236,IPC-237
LSAs to be flooded, displaying						IPC-240
MD5 (Message Digest 5) authentication								IPC-226
enabling	IPC-226
enabling for an area				IPC-229
metrics, controlling			IPC-232
MOSPF packets, ignoring					IPC-238
multicast, IP		IPC-223
multicast addressing			IPC-226
neighbor command			IPC-228
neighbor state changes, viewing						IPC-235
network type, configuring					IPC-226
nonbroadcast networks, configuring							IPC-227
NSSA (not so stubby area)					IPC-229

defining an NSSA		IPC-229
on-demand circuit		IPC-234
packet pacing	IPC-239
path cost, specifying		IPC-225
point-to-multipoint (example)				IPC-241
point-to-multipoint, description				IPC-226
refresh pacing	IPC-236
route calculation timers, configuration					IPC-233
router “dead” interval, setting				IPC-225
route redistribution (example)				IPC-245,IPC-384
router ID, forcing choice of IPC-232
router priority, setting			IPC-225
route summarization		IPC-230
simplex Ethernet interfaces, configuring					IPC-233
stub area, defining		IPC-229
summarization of routes			IPC-230

transmission time for link-state updates, setting IPC-225

virtual link, establishing IPC-231
ospf database-filter command IPC-238
outbound resets, BGP	IPC-300
output-delay command	IPC-208

P

passive-interface command		IPC-233,IPC-370
passwords
IS-IS
area, assigning on IPC-285
authentication	IPC-285
domain, assigning on		IPC-285
interface, assigning on		IPC-282
Path MTU Discovery
understanding	IPC-83
when the router acts as a host			IPC-112
when the router acts as a router			IPC-83
peer groups

enabling a previously disabled peer group IPC-324peer groups, BGP

disabling IPC-324

Cisco IOS IP Configuration Guide

IN-569